Video

Video

Camera and Video Device Engineering

iomico helps companies build camera and video devices: smart traffic cameras, dashcams and fleet video, CCTV and IP cameras, NVR and DVR systems, edge AI cameras, and video streaming products.

We work where camera products usually get hard, between the image sensor and the cloud. Our engineers bring up camera sensors, write the drivers and BSP, build the video pipeline from capture to cloud, and keep it stable in the field. We work on embedded Linux and embedded Android, for new products and for devices already in production.

What we do for camera products

  1. Camera platform selection
    We compare SoCs and SoMs (NXP i.MX, Rockchip, MediaTek, NVIDIA Jetson) for performance, cost, and power, based on your camera count, resolution, and AI workload.

  2. Sensor bring-up and camera drivers
    We bring up and validate camera modules over MIPI CSI, USB, and analog interfaces, tune sensor parameters, and handle the BSP, kernel, and drivers.

  3. Video pipelines
    We build capture, H.264 encoding with GStreamer, local recording, live streaming, RTSP and MJPEG camera streams, event-triggered clips, and cloud uploads.

  4. Embedded Linux and Android for cameras
    We work with Buildroot, Yocto, and AOSP, optimize boot time and stability, and port camera devices between operating systems, for example from Linux to Android.

  5. Edge AI and computer vision
    We run on-device detection on NVIDIA Jetson with DeepStream, build multi-camera recognition, and design camera-agnostic video analytics platforms.

  6. Firmware for resource-constrained cameras
    We fit new features, such as secure cloud streaming, into existing cameras with as little as 1 MB of flash.

  7. Production and lifecycle
    We write factory procedures for camera installation and testing, deliver OTA updates, and maintain the firmware long term.

  8. Full device development
    When you need more than firmware, one team covers electronics, enclosure, firmware, and the mobile and cloud software.

How a camera project runs

  1. Requirements and platform: sensor, optics, interface, resolution and frame rate, codec, power and thermal limits, then the choice of SoC or SoM.

  2. Bring-up and first image: the BSP and sensor drivers, then the first stable frames on your target board.

  3. Pipeline and integration: capture, encoding, recording, streaming and upload, plus AI integration and OTA.

  4. Validation and production: testing in real lighting and temperature conditions, factory test procedures, and release.

Camera and video devices we work on

  • Smart traffic and ANPR cameras: embedded Linux, video capture, and sensor drivers for traffic systems.

  • Dashcams and fleet video: multi-camera recording, infrared night vision, GPS, and incident-triggered upload for transportation and automotive.

  • CCTV and IP cameras, NVR and DVR systems: firmware and streaming for security applications.

  • Multi-camera appliances and kiosks: computer vision inside smart fridges and unattended retail.

  • Aerial and inspection imaging: capturing camera streams to on-board storage and the cloud.

  • In-vehicle video streaming: real-time H.264 streaming on Android-based automotive platforms.

  • Broadcasting and streaming devices: digital TV receivers, set-top boxes and digital signage.

Read Our Case Stories:

Company: Tattile

We optimized embedded Linux across Tattile's AI traffic camera line, improving kernel, boot time and stability. We also developed firmware and drivers for video capture, sensor integration and hardware communication.

Smart traffic camera

Company: Rocco

A smart fridge with three cameras and computer vision. We selected the platform, brought up the camera sensors over MIPI CSI, built video capture triggered by the door opening with upload to the cloud, and wrote the factory camera test procedures.

Smart beverage fridge with computer vision

Company: SureCam

We ported a dual-camera fleet dashcam from Linux to Android and kept every core feature: video upload when an incident is detected, infrared night vision, and GPS track-and-trace.

Smart dashcam

More camera and video projects:

Building a camera or video device?

Tell us about your sensor, platform, and video requirements. We'll help you choose the platform, bring the camera up, and take the device to production.

Contact us

Address

400 Union Ave. SE,

Suite 200 

Olympia, WA 98501

Instant Messenger
Social Media

Contact us

Address

400 Union Ave. SE,

Suite 200 

Olympia, WA 98501

Instant Messenger
Social Media

Contact us

Address

400 Union Ave. SE,

Suite 200 

Olympia, WA 98501

Instant Messenger
Social Media